Stair nosing for carpet

This stair nosing for carpet is designed for carpets or vinyl floor coverings .

Stair nosing for carpet 411 is designed with a rebate at the back of 3 mm. In addition the dimensions of profile 11 is smaller by comparison with the surface mount 410.

In contrast 411 is similar to 410, but it has a rebate at the back for flooring for vinyl or carpet tiles.

For this reason carpet tile or vinyl plank will sit flush on the stairs and it also has a smaller tread.

Therefore the rebated stair nosing for carpet and vinyl allows for a carpet tile or vinyl to be cut in, which results in a neat flush mount finish whilst still providing safety on the step edge.

Product Data Sheet 411

Stair nosing 411 has a small rebate at the back as opposed to the 410 which diminishes at the back.

411 also has a smaller tread of 72 mm. It is designed for soft floor finishes as the rebate allows for the installation of carpet tile, vinyl and direct stick.

411 stair nosing has a small rebate at the back. It is not suited for hard surfaces as the rebate could pose a trip hazard. It is however recommended for all soft floor coverings on steps such as vinyl and carpet.

It is very important to note that almost all of our stairs nosing have hidden fittings. This means that because they have inserts, the fittings will not be seen.

Stair Nosing Perth's guidelines for the safe installation of stair nosing is to use Soudal Fix All Hi-Tack adhesive, and where possible to drill, plug and screw.

The Santoprene inserts are available in grey , black and yellow.

411 clear anodised with black santoprene rubber inserts (2)

Stair nosing for vinyl — 411 clear anodised with grey sanroprene rubber insert

Stair nosing — 411 black anodised with black santoprene rubber insert

Stair nosing for carpet — 411 black anodised with grey santoprene rubber insert (2)

Click here to add your own text